gutter.
Upload your Word →
Guide · bleed

Bleed: what it is and when you need it

Bleed is the extra margin added when an image reaches the edge of the page, so that no white lines are left when the paper is cut. It is one of the points checked when formatting a book for Amazon KDP. With Gutter you don't calculate it yourself: the AI detects the full-bleed images and applies the bleed when it formats your Word file.

Format your book with AI →
KindleAmazonApple BooksKoboGoogle PlayNookSmashwordsDraft2DigitalEPUB
The essentials

When you need bleed

✓It only applies if there are images that reach the edge of the page
✓Amazon KDP requires 0.125 inches of bleed on the outer edges
✓Without bleed, those images can show a white line after the printer's trim

The guillotine can drift by ~1 mm. Amazon KDP requires 0.125″ (3 mm) of bleed on the top, bottom and outside edges when an image reaches the edge of the page.

With AI

Applied automatically to your book

Gutter takes care of it for you when it formats your book.

Does your book have full-page images?

Upload your Word file and the AI applies the bleed Amazon KDP requires only where it is needed. You review it and adjust it from the chat before you pay.

Format your book with AI →Free until you're convinced
Frequently asked questions

Bleed on KDP: common questions

How much bleed does Amazon KDP require?

0.125 inches (3.2 mm) on the top, bottom and outside edges. The width increases on one side only (the outside) and the height on both: a 6 × 9 inch book with bleed is uploaded as a 6.125 × 9.25 inch PDF.

Do all books need bleed?

No. You only need it if an image or a background color reaches the edge of the page. A text-only book with normal margins is uploaded at the exact trim size, without bleed.

What safety margin do I need to leave if the book has bleed?

KDP asks you to leave at least 0.375 inches (9.5 mm) between the trim edge and the text when there is bleed, and 0.25 inches (6.4 mm) when there is none. Everything important must stay inside that margin.

What resolution should full-bleed images have?

At least 300 pixels per inch at the final print size. With a lower resolution the image looks blurry on paper even if it seems fine on screen.

What happens if I don't add bleed and my image reaches the edge?

The printer's guillotine can drift by about 1 mm, and a white strip then appears along the edge of the image. Bleed exists to absorb that drift.

Do I have to calculate the bleed myself?

Not with Gutter, the AI book formatter from Tregolam Literatura: the AI detects the images that reach the edge, applies the bleed KDP requires only where it is needed and validates the PDF before you download it.

The right bleed, no calculations

Upload your Word file, the AI formats it with the bleed KDP requires and you adjust it from the chat.

See pricing →
>PRICING<